manualshive.com logo in svg

Rinnai Ember 600, Installation Manual

Share
Download
Rinnai Ember 600 Installation Manual Download Page 23

  

Ember Installation Guide: 12890-F 06-21 

  |   

23

Step 1: Back log

Place the back log onto the two log location brackets at the back of the burner. The charred side 

faces to the front.

Step 2: Adding the granules and rockwool

Place, DO NOT POUR, the granules, ensuring even coverage around the burner ports (so as not 

to cause blockages). For the 700 you will need both granule packs, for the 600 it’s about a bag and 

three quarters. Pinch and roll the rockwool into pea-sized balls (600 ≈ 35, 700 ≈ 50) and place in-

between the granules. These can go over the burner ports as the material is designed for the flame 

to penetrate through the ceramic fibres to enhance the flame picture and produce a glow effect. 

Step 3: Front log

Add the front log onto the two log locating pins inside the grill. It should sit securely into the gap.

Step 4: Top three logs

Add the three top logs onto the locating pins of the back and front logs—refer photos on previous 

page. Underneath each log is a hole (front position) and a slot (back position). 

Summary of Contents for Ember 600









































Reviews:

No comments

Brands by name

Popular brands

Load more brands