rinnai new Zealand Limited
E-Frost Solar Collector Install Manual: 11496-a
01-10
7
Solar collector fittings kits
Hot outlet connection
the rinnai standard mounting rails are for arrangements where the hot outlet connection is
on the top right hand corner. If you have an arrangement that requires a top left hot outlet
connection you will need a different top mounting rail. this can be purchased as an accessory
from rinnai.
Stainless steel straps for tile roofs
G12 requires stainless steel straps for tile roofs. the Split System Solar Fittings Kits have
galvanised straps as standard. If collectors are being installed on a tile roof, stainless steel
straps can be purchased as an accessory item.
these are all the components for plumbing and mounting collectors on the roof.
Included
Not included (to be supplied by the Installer)
all Plumbing Fittings
air release Valve
Hot Sensor temperature Pocket
15 m of Hot Sensor Lead
angled Mounting rails for Panels
Straps
M5 Fasteners (guide stoppers for panels)
•
•
•
•
•
•
•
Mounting Fasteners
•
Example of the solar collector fittings for a two solar collector installation
