background image

Rinnai

5

DEPH_OIM

WARRANTY, FEATURES & SPECIFICATIONS

WARRANTY

The benefits to the consumer given by this warranty are in addition to all other rights and remedies of the consumer
under a law in relation to the goods or services to which the warranty relates.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and for compensation for any other loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount
to a major failure.

This heater has a 7 year parts warranty from date of purchase. If the product fails within this 7 year period return it
to the supplier with proof of purchase for repair or replacement.

Supplier warranty claims for Rinnai products or services must be made by contacting Rinnai Australia. Contact
details are on the back of this document.

The following exclusions may cause the warranty to become void and may result in a service charge and costs of
parts (if required):

1. Accidental damage and acts of God.

2. Failure due to abuse or misuse, improper maintenance, failure to maintain or improper storage.

3. Failure due to incorrect or unauthorised installations or outdoors use.

4. Failure or damage caused by alterations, service or repair work carried out by persons other than Rinnai service

persons or service agents.

5. Where it is found that there is no fault with the appliance and the issue is related to the installation or is due to

the failure of electricity supply.

FEATURES

This heater incorporates the following design features.

SPECIFICATIONS

DIY Installation:

This heater is suitable for Do It Yourself installation.

Silent Operation:

Electric element operation eliminates fan noise.

Draft Free:

Non fan operation also means no drafts.

Delay Off Timer Function:

Equipped with delay off timer, see page 9 for details.

Low Maintenance:

No moving parts makes for virtually maintenance free operation.

Tilt Switch:

This heater is fitted with a tilt switch that automatically places the heater
into standby mode if the appliance tilts more than 45°.

`Tamper Resistant´ Operation:

Includes a Lock function designed to prevent accidental operation and
small children from altering the heater settings.

Operation:

The heater uses electricity as the heating medium. It operates on the
‘natural convection’ principle where air from the room is drawn into the ‘air
inlet’ louvres at the base of the appliance, is heated inside the appliance
and expelled through the ‘air outlet’ louvres at the top of the appliance
without the use of fans. A sophisticated thermostatic system keeps the
room close to the selected temperature.

Model

DEPH-22DTW

DEPH-15DTW

DEPH-10DTW

Rated Power

2200 Watt

1500 Watt

1000 Watt

Rated Voltage

240V ~ 50Hz

Water Resistance (IP) Rating / Electrical Protection Class

IP24 / Class I

Dimensions

Height

Width

Depth

400mm

1060mm

110mm

400mm
640mm
110mm

400mm
480mm
110mm

Weight

7.1kg

4.5kg

3.5kg

Installation Options

Wall or Freestanding

Summary of Contents for DEPH-10DTW

















Reviews: