Rinnai Commercial Hybrid System Installation and Operation Manual
13
•
Choose the right hand truck to support the weight
and size of the water heater. Refer to the
Specifications
section in this manual for specific
weights and dimensions.
•
Use proper lifting techniques to load the water
heater onto the hand truck:
−
Position the water heater onto the hand truck
so the weight is evenly balanced and the tank is
touching the rails of the hand truck.
−
Secure the water heater to the hand truck:
→
Position
STRAP A
around the tankless unit
as illustrated below.
→
Position
STRAP B
around the base of the
tank below the lower enclosure.
Earthquake Strapping
Instructions
1.
Loosen the screws along the perimeter of the plastic
enclosures.
2.
Remove the plastic enclosures.
3.
Position straps around the tank per the requirements
of California Office of the State Architect.
DO NOT
POSITION THE STRAPS OVER PIPE, FITTINGS or
WIRE.
4.
Replace the plastic enclosures. Modification of the
plastic enclosures may be necessary to fit the
enclosures over the earthquake straps.
5.
Replace the screws around the perimeter of the
plastic enclosures.
Transporting the
Demand Duo
™
Lower
Enclosure
Strap A
Strap B
Products installed in the state of California must be
braced, anchored, or otherwise secured to avoid
motion or falling during an earthquake. Contact the
California Office of the State Architect located at 1102
Q Street, Suite 5100, Sacramento, CA 95811 for
instructions.
NOTICE
STRAP
Plastic
Enclosure
(Side)
Plastic
Enclosure
(Bottom)
STRAP
