![Rinnai Brivis StarPro Brivis StarPro SP535UN Installation Manual Download Page 36](http://html1.mh-extra.com/html/rinnai/brivis-starpro-brivis-starpro-sp535un/brivis-starpro-brivis-starpro-sp535un_installation-manual_1462627036.webp)
Rinnai 36
Ducted Gas Heater IM
Diagram 22. SP Series Programmable Thermostat
R
W
Control Module
R
W
Programmable Thermostat
Diagram 23. BX5 Programmable Thermostat
R
W
Programmable Thermostat
BX5 Terminal Block
W
R
10.2.2 Connect a Manual Thermostat
Connect a manual thermostat as follows:
a.
Select a suitable location for the thermostat (refer to Section 10).
b.
Run the wiring from the heater to the thermostat.
c.
Remove the thermostat front cover and connect the wires to thermostat terminals A and B.
d.
Ensure the thermostat batteries are correctly installed and mount the thermostat level on the wall (refer to, and
follow, the installation guide supplied with the thermostat).
Note:
Use only alkaline batteries as other types of battery can cause unpredictable operation as the batteries become depleted.
e.
Install the thermostat front cover.
f.
Connect the wiring to the heater at terminals R and W (refer to Diagram 24 for an SP Series heater or Diagram
25 for BX5).
g.
For fan-only operation, wire a switch in circuit between heater terminals R and G.
Diagram 24. SP Series Manual Thermostat
R
W
Manual Thermostat
SP Series Control Module