Rinnai 11
HW_CF_DELUXE OIM
Using Shower Saver / Bath Fill
Press Shower Saver / Bath Fill button once. The Shower Saver
/ Bath Fill button will illuminate and a voice prompt and tone
will sound. During Shower Saver / Bath Fill operations the 'Bath'
indicator will also be displayed in the Deluxe Kitchen water
controller digital monitor (when fitted).
The voice prompt will say "The hot water system is ready. Open
the hot water tap”. Open the hot water tap for the relevant shower
or bath.
The ‘In Use’ indicator will illuminate on all Deluxe water
controllers and the shower will run or the bath will start to fill.
To Stop Shower Saver / Bath Fill Operation
If you wish to stop the water flow whilst the Shower Saver / Bath
Fill function is in operation, simply press the Shower Saver /
Bath Fill button.
The Shower Saver / Bath Fill button will flash and the voice
prompt will say "Hot water is not available, Turn off all hot water
taps and push the Bath Fill button". Follow the voice prompt
instructions.
When Shower Saver / Bath Fill Operations Finishes
Once the Shower Saver / Bath Fill operation finishes the following
events will occur:
1. The flow from the shower / bath hot water tap ceases.
2. The Shower Saver / Bath Fill button will flash.
3. The Deluxe Kitchen water controller 'Bath' indicator will
flash.
4. A tone will sound.
5. The voice prompt will say "Bath fill is complete. Turn off the
bath hot water tap and push the Bath Fill button."
Follow the voice prompts instructions.
NOTE
The water heater will not allow hot water to flow from any fixture until the Shower Saver / Bath Fill
button has been pressed�
6. The Shower Saver / Bath Fill button light on the Deluxe Bathroom water controller and the 'Bath' indicator on
the Deluxe Kitchen water controller monitor (when fitted) will go out.
NOTE
CHECK WATER TEMPERATURE BEFORE USE�
A parent or carer should always check the temperature before a child is placed in contact with hot
water, see page 8�
NEVER LEAVE YOUNG CHILDREN UNATTENDED IN THE BATH�
When using the 'Shower saver / Bath fill' function, ALWAYS close the hot water tap for the bath or
shower after the flow has stopped.
Water Controller Combinations & Configurations
Wireless, Universal and Deluxe water controllers can be combined, Refer to "Water Controller Combinations &
Configurations" on page 5 to confirm the maximum number and combination of controllers that can be fitted.
HOT
HOT
COLD
COLD
ON!
ON!
HOT
HOT
COLD
COLD
OFF!
OFF!
HOT
HOT
COLD
COLD
OFF!
OFF!
WATER CONTROLLER OPERATION