Arriva 752 operation guide: 12219-C 03-20 |
13
Symptom
Cause
Solution
Remote control doesn’t
work
Fire not plugged in properly or turned off
Plug in power cord, or press the On/Off button
on the control panel
Timer set
Use the override button
Lock set
Cancel lock (hold for three seconds)
Remote lockup due to signal being out of
range, incorrectly aimed, or obstructed
Change position of where you are operating
the remote, or remove obstruction
No indication or control
panel indicators
Fire not plugged in properly or turned off
Plug in power cord, or press the On/Off button
on the control panel
Mains power failure
Use power reset procedure, refer p.6
Arriva stops during
operation
Mains power failure
Use power reset procedure, refer p.6
Filter obstructed
Remove and clean filters
Gas supply turned off
Turn on the gas supply at the meter or cylinder
Burners fail to ignite
Air in gas pipe when initially installed
Installer to purge air from gas supply
Gas supply turned off
Turn on the gas supply at the meter or cylinder
Smell of gas
Gas escape
Isolate gas supply and contact a Rinnai
Service Centre
No display on remote
Flat batteries
Replace batteries in remote
