Rinnai 09.12 Series, Operation Manual, Page: 18 / 28

Rinnai New Zealand Continuous Flow Water Heater Operation Manual
01-09
18
Initial settings
Setting
shower/bath
temperature
and volume
Temperature = 40 °C
Volume = 100 litres (range 30 - 400 litres)
With the system on, select a Deluxe Bathroom Controller. If it does not
have priority, press the ‘Transfer’ button once and the ‘Transfer’ button will
illuminate.
Press ‘Shower Saver/Bath Fill’ button once. The button will illuminate and
voice prompt and tone will sound. Ensure you have the voice and sound
turned on.
To select the desired delivery temperature use the ‘Temperature’ up and
down buttons. The selected temperature will be displayed on the digital
monitor and will remain as the default ‘Shower Saver/Bath Fill’ temperature
until it is changed or if the mains power is turned off for an extended
period.
When filling a bath for the first time, it is recommended that a low bath fill
v olume such as 60 litres or lower be used. During subsequent bath fills the
volume can then be adjusted to suit your known bath v olume or desired fill
level.
A volume counter (to highlight remaining volume of water to be delivered)
displays on the controller below the temperature display (replaces the clock
during ‘Shower Saver/Bath Fill’ operation).
•
•
Operating the shower sav er and bath fill
Bathroom Deluxe Controller
When filling
the bath or if
the water has
been turned off
Be careful not to ov erfill the bath, an average bath volume is 160 litres. It is
recommended that when filling a bath for the first time you should:
remain b y the bath during the filling process
use a low bath fill volume such as 60 litres or less
•
•
If the ‘Shower Sav er/Bathfill’ is interrupted ( water is turned off) for any
reason and there is more than half the volume of the set amount of water
delivered, the ‘Shower Saver/Bath Fill’ will reset itself back to normal
operation when turned on again.
For example:
Set
Volume
Delivered Volume (bathfill
interrupted - tap closed)
Delivered Volume (bathfill restarted
- tap turned on again)
160 L 50 L 110 L
160 L 110 L Resets back to normal operation