BEFORE PLUGGING THE UNIT
1. Make sure the water dispenser is not plugged into an electrical
outlet.
2. Open the door of the lower cabinet.
3. Place full water bottle on floor. Remove the plastic cover over the
mouth of the water bottle.
4. Place the suction tube inside the bottle and place the water bottle
cap firmly over the mouth of the water bottle.
5. Slide the bottle inside the cabinet and close the lower cabinet door
6. Plug the water cooler into a grounded power outlet and turn on the
power switch located on the back.
7. The unit will start to operate,
but you should wait at least half an
hour before using the water cooler.
8. This unit is equipped with a switch that turns the heating feature in
and off. If you are not going to use hot water, turn the heating
switch to "OFF" to conserve energy.
Summary of Contents for BY530
Page 1: ...BY530 ...
