Push the rubber pad
into the top of the
base.
Flip the base toward
the rear.
Drive the screws.
Hold the circular part of the base against
your wall, rubber-side down. Use the
integrated level to ensure it’s straight.
Then, mount it with the included screws.
Finally, snap the cover onto the base
and install the security screw.
Mounting on a wall?
Swivel the base
above the camera.
Push the rubber pad
into the base.
Drive the screws.
Hold the circular part of the base
against your ceiling, rubber-side down.
Then, mount it with the
included screws.
Finally, snap the cover onto the base
and install the security screw.
Mounting on a ceiling?
9
8
Stick_Up_Cam_Wired_MANUAL.indd 8-9
7/30/18 6:21 PM
