6
Group Identifier
2
Node ID
Blank/Nothing Entered
Marker
0x00
vg
1 (Press plus button to make the variant group fields appear.)
Multi-Channel Node ID
01 (Controller’s Node ID)
End Point
0x00
Bit Address
Not Selected
Parameter
Number
Description
Number
of Bytes
Default
Min
Max
1
Number of seconds between periodic
battery reports. (Heartbeats)
2
4200
(0x1068)
255 (0xFF)
4200
(0x1068)
2
One-Time Wakeup Notification. (In ad-
dition to normal Wakeup Notification)
2
0
(Not in use).
1 (must be
divisible by
sleep step
time of
configuration
parameter 7)
3600
(0x0E10)
3
Number of Application Level Retries
after a failed transmission defined as
either not ACKed or Supervision Report
not returned when encapsulated.
1
5
1
15
4
The minimum number of seconds to
sleep between application level retries.
1
6
1
60
(0x3C)
5
Application Retry Multiplier.
The number of seconds between a
current application retry is the count
of retries multiplied by this number in
s a small random delay.
1
5
1
5
Association
This sensor has two Association groups with only one node for each group. Group one is a lifeline
group who will receive unsolicited messages relating to case tamper notifications, battery level
notifications, Wake-Up notifications, and Device Reset Notifications. Group two is intended to be used
with multi-channel association for a controller to subscribe to contact switch open/close notifications
sent encapsulated from each of the eight endpoints one for each contact switch. Each endpoint must
be enabled by putting the controller’s node ID into the device’s Association Group 2 with either an
Association Set encapsulated with Multi-Channel Encapsulation OR a Multi-Channel Association Set
encapsulated with Multi-Channel Encapsulation.
Example Multi Channel Association Set Command:
Configuration
The sensor has seven supported configuration parameters.
