6
7
Install the anchors.
(optional)
On stucco, brick, or concrete, use
a 1/4" masonry bit to drill holes in
your wall, then insert the included
wall anchors.
(If you’re installing on wood or
siding, you can skip this step.)
Screw in the Corner Mount.
Grab the Plug-In Adapter and
feed the end of the wire through
the center of the Corner Mount.
Using the long mounting screws,
secure the Corner Mount to the wall
through the slots (fig. 3). If you’re re-
using existing holes, secure it with
the adjacent screw holes (fig. 4).
fig. 3
fig. 4
3/16"
Security screw
1-3/8" Long
mounting screw
5/8" Short
mounting screw
DO NOT USE any screw other than the
included long mounting screws when
securing your Ring Doorbell.
If you are running the wire up
your wall (instead of through it),
DO NOT over-tighten the screws.
Summary of Contents for Doorbell Pro 2
Page 1: ...User Guide Doorbell Pro 2 ...
Page 11: ...XX XXXXXX XX ...
