background image

13

Frequently asked questions

How do I know if the battery is charged?

The SmartChargePro’s FULLY CHARGED LED will illuminate. If using the optional remote control the 
bi-colour LED will illuminate green (solid).

The battery does not appear to be charging?

-

 ‘Charging’ LED does not light up (RSCPR7, RSCPR15 and RSCPR25)

-

 ‘LCD display displays 0.0v (RSCPR25, RSCPR35, RSCPR50 and RSCPR824)

The battery voltage is less than 2.5v. To increase the battery voltage to over 2.5v connect a set of  
booster cables between the battery and a donor battery, this will allow the voltage to increase to 
above 2.5v.  When the battery voltage is above 2.5v reconnect the SmartChargePro

Can I use the charger as a power supply or a battery support unit?

By selecting the Power Supply mode you are able to use the charger as a power supply to run an 
appliance or battery support unit to maintain battery power. 

RSCPR7, RSCPR10 and RSCPR15 –

 works with without the battery in vehicle

RSCPR25, RSCPR35, RSCPR50 and RSCPR824 –

 Requires a battery in vehicle

What happens if I have an appliance connected to the battery while charging?

Powering an appliance while charging will impact on the SmartChargePro’s ability to accurately 
measure the charge being applied. For optimum charging it is recommended to charge the battery 
without an appliance connected. Power Supply mode is recommended when an appliance is 
connected and drawing power

Why does Calcium mode take so long?

The calcium charging mode includes an additional charging stage, EQUALISATION. This consists of a 
constant current being applied to the battery until 16v (for 12v batteries) or 32v (for 24v batteries)  
is reached. This rejuvenates the battery cells and can take up to 12 hours.

Why do I need a special calcium mode?

Due to the different chemistry required to make a calcium battery a different charging algorithm is 
required. Calcium batteries are also affected when deeply discharged or heavily used.  
They need to be recharged by a calcium charger to fully recharge the battery and to maximise the 
batteries life and performance.

Summary of Contents for RSCPR10















Reviews: