Part Number
Fuse
RSCPR7
15amp
RSCPR10
20amp
RSCPR15
30amp
RSCPR25
30amp
RSCPR35
50amp
RSCPR50
100amp
RSCPR824
12amp
12
Mounting Instructions
The end plates of the charger include a 3.5mm mounting hole to allow for permanent fixing.
Positioning:
The SmartChargePro must be placed in a dry, well ventilated area. Ensure there is at
least 10cm clearance from the end plates to allow adequate ventilation for the cooling
fan. Do not cover the charger and keep clean and free of dust.
For permanent connection it is advised to connect to the battery terminals with a ring terminal
connection. Ensure all sensor wires that run parallel to both positive and negative cables are also
connected. Include an in-line fuse on the red (+) cable between the battery and SmartChargePro,
ratings below:
3.5mm
mounting hole
