5-2
RL35HWV40/GB/N
O
7768/16279
Controls and indicators
5.2
Ultrasonic Generator RL35
26
Generator module handle
If necessary, you can pull out the generator
module by holding these grips. The fastening
screws (33) for opening the generator modu-
le are located above and below the grip bars.
The generator module is never to
be pulled out or plugged in while
mains is connected. (high voltage)
27
LED bar
This display indicates the power supplied
during the welding operation. When the horn
is idle (vibrating freely in the air), the display
should not rise above the 25% mark.
An error message will be issued if the 100%
mark is exceeded.
28
LED "POWER"
"POWER" indicator.
29
Key "US-TEST"
Key to activate ultrasonics test.
Do not touch horn!
30
LED
- "US-ON" Ultrasonics active
- "VALVE" Solenoid valve active
- "ERROR" Error output active
2