1
For more information vist
rimage.com/support
2001809_A
Introduction
This manual provides the information needed to configure, operate,
and maintain the Rimage Copy Station in conjunction with the Rimage
Professional 5400N system. The terms ‘system’ and ‘autoloader’ may be
used throughout this manual to refer to the 5400N. The term ‘printer’ is use
to refer to the integrated Everest 400 printer.
For information specific to the Professional 5400N refer to the
Rimage
Professional
3400 and 5400N User Guide
found at
www.rimage.com/
support
. From the
Support
menu select:
Professional Series
>
5400N
>
User
Manuals
tab.
Important!
Your Rimage Copy Station and Professional 5400N system may
not look exactly like the model featured in this user guide.
About this User Guide
• While we try to maintain all versions of our manuals and
documentations, please note that the English version found on our web
site always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows XP paths. Other Windows operating system navigation may
differ slightly.
• These notes and symbols are used throughout the manual to help clarify
information:
Tip:
A Tip suggests alternative methods that may not be obvious and helps
you understand the benefits and capabilities of the product.
Important!
•
An Important note provides information essential to the completion
of a task.
•
Important supplemental information.
•
You can disregard information in a Tip and still complete a task, but
do not disregard an Important note.
n
Caution:
A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
n
Warning!
A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining the
equipment.
About the
Copy Station
The Copy Station is part of the Rimage Solutions series of products. The
Copy Station consists of a touch screen monitor, a Rimage 5400N with
integrated Everest 400 printer and an embedded control center (PC)
.
There
is also an attached camera and lighting system for copying disc labels.
For information about setting up and submitting orders from a networked
PC, refer to the
Rimage Advanced Setup (Networking) Guide
available at
www.rimage.com/support
.
Unpacking and Setup Instructions
Installation instructions are included with the Copy Stations’s touch
screen monitor. Refer to
Install the Touch Screen Monitor
for installation
information.
