Run Masker
The Rimage Raster Masker displays allowing you to adjust the mask (non-printable area)
settings for the selected media type (
Standard CD/DVD 120 mm
only). This works well when
you do not want the edges printed. If you print on the edges of a disc where there is not
printable surface, the ink will smear or run.
Standard Area Settings
let you adjust the standard outer and inner diameter settings, etc.
Hub Settings
let you select the
Print On Hub
feature and adjust the related outer and inner
diameter settings.
Parameter Unit
lets you switch between a unit of measure of times 1.0 mm or times 0.1 mm.
Maintenance
The maintenance section allows you to select alignment functions, diagnostics, or update the flash.
Center Image
–
The Center Image function is only required if the printed image is not
centered on the label. Directions are found on the next page.
Align Cartridges
– directions are found on page
14
.
Diagnostics
– directions are found on page
27
.
Update Loader Flash
– Do not use. This function is not supported on standalone Liberty
Printers.
Clean Cartridges
– Cleans the ink jet nozzles when the jets are dried out. Refer to page
27
.
23
