5. How to Operate
5-5. Detection mode
- 29 -
5-5. Detection mode
<Flow Rate Indicator>
Because the flow rate of the gas detector is automatically adjusted by the flow rate control function, the flow
rate, in principal, does not need to be controlled. As shown on the figure below, when the flow rate does not
correspond to the specified flow rate for some reasons, it is adjusted automatically.
Low flow rate
Excess flow rate
Normal flow rate
CAUTION
If the automatic flow rate adjustment does not work (due to clogged tube or leak), messages such as
“FLOW” for an unstable flow rate or “E-05” for flow rate abnormalities are displayed. In this case, you
must identify the causes and take appropriate actions.