Riken Keiki SD-1RI, Operating Manual

Page: 34 / 57

7 Maintenance 7-1. Maintenance intervals and items
- 31 -
Main Services
Power Supply
Check : Checks the power supply voltage.
Verifies that the power lamp lights up.
(Verifies that relevant points can be identified on the system.)
(When a UPS (uninterruptible power system) is used, checks the operation with the UPS
(uninterruptible power system).)
Concentration
Display Check : Verifies that the concentration display value is zero by using the zero gas.
Performs the zero adjustment (AIR adjustment) if the reading is incorrect.
Alarm Test : Inspects the alarm circuit by using the alarm test function.
• Checks the alarm lamps. (Check each activation of ALM.)
• Checks the external alarm. (Checks the activation of the external alarm, such as a buzzer.)
Span
Adjustment : Performs the sensitivity calibration by using the calibration gas.
Gas Alarm
Check : Checks the gas alarm by using the calibration gas.
• Checks the alarm. (Checks the alarm activation when the alarm setpoint is reached.)
• Checks the delay time. (Checks time to delay until the alarm is triggered.)
• Checks the alarm lamps. (Check each activation of ALM.)
• Checks the external alarm. (Check the activation of external alarms, such as a buzzer and
reset signal.)
Cleaning and
Repair of the
Detector
(visual
diagnosis) : Checks dust or damage on surface, cover, or internal parts of the detector, clean and repair
such parts of the detector.
Replaces parts which are cracked or damaged.
Detector
Operation
Check : Uses the keys to check the operation of functions and parameters.
Replacement of
Consumable
Parts : Replaces consumable parts, such as a sensor, filter and pump.