5. How to Use
5-7. Power-off
26
<Setting Display "1-2">
The setting display "1-2 CONF" is not used.
1-2.CONF
Not used.
When the SET button
is pressed, press the
MODE button to return
to the previous screen.
5-7. Power-off
Slide the power switch down to power off.
After turning off the power switch of the monitor, turn off the power supply (100 VAC or 24 VDC) of the
monitor.
CAUTION
When the monitor is turned off, an alarm may be triggered on the upper (central) system.
Before turning off the monitor, the inhibit (point skip) on the upper (central) system must be
activated.
Decide whether the power can be turned off by checking the operation of the devices connected to
the external output or external contact output terminal of the monitor.
