4. How to Install Gas Monitor
4-3. Installation of monitor
14
4-3. Installation of monitor
Install the main unit on the wall 50 to 180 cm up from the floor.
If wall screws are available, remove the screw at the lower part of the main unit to open the cover and
install the unit using the mounting holes on the back of the unit.
NOTE
To install the main unit to the wall with screws, use the mounting holes on the back of the unit
according to the following procedure.
(1) Loosen the screw at the lower part of the main unit and open the surface cover of the case.
(2) Fix the main unit with two screws (M4) through the mounting holes.
(3) Put the surface cover back on the case and tighten the screw at the lower part of the main unit.
CAUTION
Install the sensor in a place not directly exposed to ventilation from an air conditioner.
Sudden changes in the temperature may cause the readings not to come back.
Cable outlet
Mounting hole (for M4
screw)
*Supporting the switch
box
