background image

1 Outline of the Product

 

 

1-1. Preface 

 

 

- 2 - 

 

 
 
 
 

Outline of the Product 

 
 
 
 

1-1. Preface 

 
Thank you for choosing our fixed type oxygen detector head GD-1OX/GD-1DOX. Please check that the 
model number of the product you purchased is included in the specifications on this manual. 
This manual explains how to use the two models: GD-1OX, GD-1DOX and their specifications. It contains 
information required for using the gas detector properly. Not only the first-time users but also the users who 
have already used the product must read and understand the operating manual to enhance the knowledge 
and experience before using the detector. 
Note that the detector cannot be used alone. Use it with the dedicated indicator/alarm unit. Be sure to read 
the operating manual of the indicator/alarm unit as well. 
 

GD-1OX Diffusion 

type 

GD-1DOX Suction 

type 

     
 

1-2. Purpose of use 

 

 

This detector is a fixed type gas detector head that detects oxygen and performs the alarm activation 
when the gas concentration is over the setting value. 

 

The detector is a safety unit, not an analyzer or densitometer which performs quantitative/qualitative 
analysis/measurement for gases. Please fully understand the features of the detector before using it, 
so that it can be used properly. 

 

The detector detects abnormalities in the air caused by presence of gases or other reasons (leak) with 
the built-in gas sensor.   

 

The suction type of the detector uses an external pump, etc. to introduce gas and performs gas

 

detection. 

 

Use the detector in combination with an indicator/alarm unit that indicates an oxygen concentration 
and triggers an alarm. 

 

1-3. Definition of DANGER, WARNING, CAUTION and 

NOTE 

 

 DANGER

 

This message indicates that improper handling may cause serious damage on 
life, health or assets. 

 WARNING

 

This message indicates that improper handling may cause serious damage on 
health or assets. 

 CAUTION

 

This message indicates that improper handling may cause minor damage on 
health or assets. 

NOTE

 

This message indicates advice on handling. 

 

Summary of Contents for GD-10X Series




































Reviews: