15
E
N
G
L
IS
H
5. FITTING OPTIONS
CHANGING FLUE PIPE CONNEC-
TION ABOVE TO CONNECTION AT
REAR
(Page 4)
- Remove the both natural stone covers (part 40 and
41).
- Cut out the pre-stamped, round section in the rear
wall (part 46) using a hacksaw.
Please remember when changing the flue pipe connec-
tion that the individual parts of the soapstone panel-
ling weight about 34 kg. In addition the surfaceof the
soapstone should be protected to prevent scratching.
- Swap the flue gas connector and the hob (part 51, 53)
with each other.
- Fit the new plate fins (part 43 - must be optionally or-
dered).
(Make sure your fingers do not become trapped)
Summary of Contents for VITRA
