RIKA Vitra Passivehouse, Instruction Manual

Page: 15 / 20

- 15 -
E
N
G
L
IS
H
5 . A S S E M B L Y O P T I O N S
CHANGING FLUE PIPE
CONNECTION ABOVE TO
CONNECTION AT REAR
- Remove the both natural stone covers (part ??
and ??).
- Cut out the pre-stamped, round section in the rear
wall (part 46) using a hacksaw.
Please remember when changing the flue pipe
connection that the individual parts of the soapstone
panelling weight about 34 kg. In addition the surfaceof
the soapstone should be protected to prevent
scratching.
- Swap the flue gas connector and the hob (part 51, 53)
with each other.
- Fit the new plate fins (part 43 - must be optionally
ordered).
(Make sure your fingers do not become trapped)