18
Options for DOMO BACK
R 2
R1
R 3
R 4
Tip
Right / Left according to standing in front of the stove!
Nr. Connection
Parts
R1
Rear
-
R2
Left side range
E11319 straight flue pipe*
R3
Right side range
E11318 straight flue pipe*
R4
Rear top range
E14462 90° elbow with cleaning lid*
*from the standard RIKA flue pipe
Dimensions
RH1 = RH2 = RH3
[cm]
29
RH4
[cm]
52
RS1
[cm]
30
RS2
[cm]
21
RS3
[cm]
39
RS4
[cm]
32
RT1
[cm]
1
RT2
[cm]
6
RT3
[cm]
8
RT4
[cm]
4
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled completely�
Note
During assembly / dismantling do not allow objects (screws etc�) to
fall into the pellet container – they can block the screw conveyor
and damage the stove�
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments�
Select soft bases to prevent scratches to your living space furniture
and stove panels�
Note
Protect all cables and the silicone hoses inside the stove from the
heat! Improper installation can damage your stove and void your
warranty�
Left side connection R2
Remove the the left rear panel and the left side panel as described
before�
Cut along the marked perforation of the left rear wall
Cut along the marked perforation of the left side panel�
Replace the flue gas stack and the left cover against each other�
Place the correspondent flue pipe on the side� Make sure that
everything is tight!
Install the removed parts in reverse order�
#8
