Installation
Guide
RIGOL
3
4.
Secure the side beam fasteners to the
cabinet by using four M6 screws and
four M6 nuts.
5.
Attach another two side beam
fasteners to the back ends of each
rail respectively, as shown in the
figure below, and then secure them
with four M4 pan head screws. Use
four M6 screws and four M6 nuts to
secure the side beam fasteners to the
cabinet.
6.
Attach each pair of connecting plates to
two adjacent instruments respectively
(first mount Connecting Plate A at the
left side of Instrument A, and then
mount Connecting Plate A and B in an
alternating order), and secure them
with eight M4 countersunk flat head
screws.
7.
Connect the three instruments by
joining each pair of connecting
plates.
Installation
Guide
RIGOL
4
8.
Place four retaining brackets onto the
connecting positions of the rear panels
of the three instruments, and then
secure the retaining brackets with eight
M4 pan head screws.
9.
Attach the left fastener to the left side
of Instrument C, and secure it with
two M4 pan head screws.
10.
Attach the right fastener to the right
side of Instrument A, then secure it
with two M4 pan head screws.
11.
Place the assembled instruments and
rack onto the bottom plate. Then,
secure the left and right fasteners to
the cabinet by using four M6 screws
and four M6 nuts.
Connecting Plate A
-End-
Connecting Plate B
Instrument B
Instrument B
Instrument A
Instrument C
Instrument A
Instrument B
Instrument C
Instrument C
Instrument A
Instrument B
Instrument A
Instrument C
