Rigol PR7080S, User Manual, Page: 42 / 49

RIGOL
12 RP7000S User’s Guide
To Use Hand-held Single-ended Probe Head
Known from Probe Head, RP7000S can easily change the probe head by using
the method introduced in To Replace Probe Accessories. This chapter
introduces how to use the probe heads respectively.
The hand-held single-ended probe head provides an effective bandwidth of
more than 1.5GHz. Besides, the spacing between the single-ended ground
collar and probe tip can be adjusted by rotating the ground collar and the
replaceable probe tip and single-ended ground collar prolong the service life of
the probe.
The hand-held single-ended probe head can be used to measure single-ended
signal. During the measurement, the single-ended ground collar must be
grounded. Pay attention to their polarities when connecting the probe head and
active probe amplifier.
The structure of the hand-held single-ended probe head is as shown in Figure
6.
Figure 6 Hand-held Single-ended Probe Head
①
②
③