Rigol DSG800 Series, Quick Manual

Page: 15 / 72

RIGOL
DSG800 Quick Guide 3
3. Menu Control Keys
Display switching key. In the menu page of any function,
you can press this key to open the parameter information
display interface of the current function. At this point, you
can use the knob or direction keys to switch the parameter
tabs to view the parameter information of different
functions. Pressing this key again will switch to the
function menu corresponding to the parameter tab
currently selected. In addition, you can press any function
key to exit the parameter information display interface.
Menu softkeys corresponding to the menus displayed at
the left of the softkeys respectively. Pressing the softkey
will activate the corresponding menu.
Menu page up/down key.
4. Function Keys
Set the frequency parameters of the RF output signal as
well as the related parameters of LF output.
Set the amplitude parameters of the RF output signal and
provide the flatness calibration function.
Set the sweep type, sweep manner, sweep mode and etc.
Set the related parameters of amplitude modulation (AM),
frequency modulation (FM), phase modulation (ØM), pulse
modulation and pulse generator as well as I/Q modulation
and I/Q modulation source.