Rigol DSA1000A Series, Programming Manual

Page: 36 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-22
reference marker and the delta marker in “Span Pair” marker mode.
Such as :CALC:MARK1:X:POS:SPAN 150
The query returns “150”.
Explanations

<n> is 1, 2, 3 or 4.

For the range of <param>, refer to “[:SENSe]:SWEep:POINts”.
48. :CALCulate:MARKer<n>:X:POSition:STARt
Syntax :CALCulate:MARKer<n>:X:POSition:STARt <param>
:CALCulate:MARKer<n>:X:POSition:STARt?
Function Sets the position of the reference marker on the related trace in
“Delta Pair” marker mode, such as
:CALC:MARK1:X:POS:STARt 10
The query returns “10”.
Explanations

<n> is 1, 2, 3 or 4.

For the range of <param>, refer to “[:SENSe]:SWEep:POINts”.
49. :CALCulate:MARKer<n>:X:POSition:STOP
Syntax :CALCulate:MARKer<n>:X:POSition:STOP <param>
:CALCulate:MARKer<n>:X:POSition:STOP?
Function Sets the position of the delta marker on the related trace in “Delta
Pair” marker mode, such as
:CALC:MARK1:X:POS:STOP 600
The query returns “600”.
Explanations

<n> is 1, 2, 3 or 4.

For the range of <param>, refer to “[:SENSe]:SWEep:POINts”.
50. :CALCulate:MARKer<n>:X:READout
Syntax :CALCulate:MARKer<n>:X:READout
FREQuency|TIME|ITIMe|PERiod
:CALCulate:MARKer<n>:X:READout?
Function Sets the marker readout type on X-axis.
The query returns “FREQ”, “TIME”, “ITIM” or “PER”.
Explanations <n> is 1, 2, 3 or 4.
Default
FREQuency
Front Panel
Marker, Readout, Frequency/Period/
Δ
Time/ 1/Δtime
51. :CALCulate:MARKer<n>:X:SPAN