Rigol DSA1000A Series, Programming Manual

Page: 130 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-116
The query returns “T1”, “T2” or “T3”.
Default T1
9. :TRACe:MATH:B
Syntax :TRACe:MATH:B T1|T2|T3
:TRACe:MATH:B?
Function Selects a trace as the trace B for the trace math from T1, T2 or T3.
The query returns “T1”, “T2" or “T3”.
Default T2
10. :TRACe:MATH:CONSt
Syntax :TRACe:MATH:CONSt <integer>
:TRACe:MATH:CONSt?
Function Sets the constant of the trace math in dB, such as
:TRAC:MATH:CONS 10
The query returns “1.01”.
Explanations <integer> ranges from -300 dB to 300 dB.
Default
0 dB
11. :TRACe:MATH:TYPE
Syntax :TRACe:MATH:TYPE A-B|A+CONST|A-CONST
:TRACe:MATH:TYPE?
Function Sets the computational method of the math trace.
The query returns “A-B”, “A+CONST” or “A-CONST”.
Default A-B
12. :TRACe<n>:MODE
Syntax :TRACe<n>:MODE
WRITe|MAXHold|MINHold|VIEW|BLANk|VIDeoavg|POWeravg
:TRACe<n>:MODE?
Function Sets the type of specified trace.
The query returns “WRIT”, “MAXH”, “MINH”, “VIEW”, “BLANK”,
“VID” or “POW”.
Explanations

<n> is 1, 2 or 3.

All trace data will be erased after you change the sweep points
(by using “[:SENSe]:SWEep:POINts”).

The query of “:TRACe2:MODE?” and “:TRACe3:MODE?” will