Page 4 OF 6
Instruction # 53026
Step 3:
With the help of an assistant align the
cross support
4
with the stickers on both leg
assemblies. See below. Insert (4) socket
screws
7
through the holes in the ends of the
cross support and thread them into the weld
nuts that are held in place by the stickers. Do not
fully tighten. Check that the cross support is level
and parallel to the worksurface. Fully tighten the
socket screws.
Step 4;
Insert (2) end caps
5
into the ends of
the cross support.
Both legs.
Step 3
4
5
7
Step 4
