Page 3 OF 6
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: 800.298.4351
Fax: 866.882.9475
www.raproducts.com
Instruction # 53205
ITEM # PART #
DESCRIPTION
QTY.
1
Varies NH Type 1 Worksurface
1
2
Varies NH S4 Fixed Leg Assembly
2
3
51708 M5 x 18mm (7/8") Sq/Ph/Wshr Head Wood Screw 34
4
Varies NH S4 Cross Support
1
5
800934 Cross Support End Cap
2
6
Varies LT U-Channel
1
7
53638 5/16-18 x 3/8 Button Head Socket Screw
4
Step 1:
Lay the worksurface
1
on a protected surface
with the pilot holes facing up. Align the holes in the
worksurface supports on the leg assemblies
2
with
the pilot holes in the worksurface. The leg assemblies
are interchangeable.
Step 2:
Attach the worksurface supports to the work-
surface with (1) wood screw
3
in each outside corner.
Leave the screws loose by about 1/8" so you can
adjust the legs when attaching the cross support
4
later.
1
2
3
Worksurface
Support
Steps 1 & 2
