Right Weigh 201-EBT-04B Installation & Operation Manual Download Page 2

Page: 2 / 24

WELCOME

Thank you for choosing to drive more and scale less! Here at Right

Weigh, we are committed to making our products simple to install

and easy to use. We understand that installation can vary between

vehicles and yours may not be described in this manual. In any event,

our technical support team is ready to answer your questions!

FOLLOW US!

(503) 628-0838

(888) 818-2058 - Toll Free (USA ONLY)

[email protected]

www.rwls.com/manuals-resources/

IMPORTANT!

Please read instructions COMPLETELY and thoroughly before installation. Right Weigh, Inc. is not

responsible or liable for any negative consequences as a result of improper installation or

operation including, but not limited to, product failure or damage that could aﬀect the integrity of

the vehicle.

The installation steps in this manual are for the sole use of trained installers. Right Weigh, Inc.

accepts no responsibility or liability for issues involving, but not limited to, incorrect installation

that occur from misinterpretation of the steps outlined in this document.

It is the end user’s responsibility to be aware of vehicle manufacturer policies before making

modiﬁcations to the vehicle. Right Weigh, Inc. is not liable or responsible for issues regarding, but

not limited to, warranties with other manufacturers. This is the responsibility of the end user.

For a more detailed explanation of the the warranty and liability of Right Weigh, Inc. please refer

to the “Warranty Statement” and “Return Policy & Repairs” section of this document and

www.rwls.com/warranty.

Summary of Contents for 201-EBT-04B

























Search results

Summary of Contents for 201-EBT-04B

Reviews:

Related manuals for 201-EBT-04B

Brands by name

Popular brands

Right Weigh 201-EBT-04B, Installation & Operation Manual

Search results

Summary of Contents for 201-EBT-04B

Reviews:

Related manuals for 201-EBT-04B

Brands by name

Popular brands