- 15 -
The “WTI audio TX buffering” parameter should normally be at a minimum.
Increase this value when operating via the Internet.
Command Port (TCP), Audio port (UDP), PTT/CW port (UDP) – should be the
same as you previously set in the WTI Configurator.
Press the Apply button when finished.
Audio settings
In the ShackLink Settings window, choose the Audio tab. From the “Audio input”
drop-down list, select a sound device your microphone is connected to:
From the “Audio output” drop-down list, select Speakers or Headphones.
Leave “Audio RX buffering” at a minimum level. Increase this value when
operating via the Internet.
It is recommended to leave Sample rate and Codec parameters at their default
values.
Please notice the “Windows audio devices…” button which opens the Windows
configuration of audio devices to adjust output volume, microphone gain, etc.
Press Apply to continue.
