9
Arm supports
A pair of arm supports, either
armrests or forearm prompts, were
selected with purchase of chair.
Both types of arm supports come in left
and right pairs and insert into large slots at
either side of seat.
Both types of arm supports can be removed
for side transfers.
To insert arm support and to adjust its
height, depress white button (A) just below
arm support slot at side of seat, insert arm
support, move it up or down to required
height, release button and make sure
support clicks into place (see Figure 8a).
To remove arm support, depress white
button just below arm support slot at side
of seat and pull upwards on arm support.
Armrests can be set at a wide range
of angles to backrest and seat.
To set angle of wooden armrest, lift white
tab (B) below outer edge of armrest (see
Figure 8a) and rotate armrest to desired
angle. Release tab and make sure armrest
clicks into place.
Figure 8a (Armrests)
B
B
A
A
Note:
Cut outs on wooden armrests
should be toward back of chair.
