27
Sandals and Wedges
Sandals can be used with footboard
to provide positive positioning of
user’s feet. Adding wedges beneath
sandals allows for a custom fi t of
sandal height and tilt.
Sandal bases come in a left and right
pair.
To install, place sandal base on footboard
and position it above one of the pairs of
screw threads embedded in footboard. Use
black knobs provided to secure sandal base
to footboard. Begin by tightening knobs
only halfway, slide sandal base back and
forth until desired position is reached, then
tighten knobs fi rmly (see Figure 26a).
Latch sandals onto sandal bases using
white levers (see Figure 26b)
To install wedge, pull back white lever at
side of sandal to free sandal from sandal
base. Place wedge on sandal base and
push bottom lever back towards side of
sandal base. This locks wedge onto base.
Repeat if more wedges are added. Finally,
place sandal on top of stack and lock it
into place by pushing corresponding white
lever (see Figures 26b and 26c). Make
sure sandals and wedges are fi rmly locked
together before use.
Wedges may be used either way around
and stacked.
Secure user’s feet using sandal straps.
Sandal base
Screw thread
Knob
Figure 26a
Figure 26b
Sandal latch
Wedge
Figure 26c
Sandal
Wedge
Sandal base
