14
Figure 14a
Tray
Attaching the tray:
1. Lock the casters.
2. Turn the handcrank until the Prone
Stander is nearly vertical.
3.
Figure 14a:
Hold the tray in front of you
with the adjustable brace (A) down.
4.
Figure 14b:
Place the hook (B) into the
slot on the mast of the Stander.
5.
Figure 14c:
Hold the tray by the latches
and pull latch handles out (C). Clip
latches into ends of black tubular cross
piece (D) at the top of main board.
6. Make sure that tray is securely fastened
and latches are clipped in place.
Adjusting the tray:
Figure 14a:
Use knob (A) to adjust the
angle of the tray. Be sure to tighten knob
securely after adjusting.
A
A
Figure 14b
B
B
Figure 14c
C
C
D
D