Triangulation Laser Sensors, RF605 Series
RF605 [Revision 2.0] 10th January 2011 valid for sensors with serial numbers 11000 and higher
22
Setting of all configuration parameters of the sensor is possible with the help of
the respective panel (
Sensor configuration parameters
):
14.6.2. Saving parameters
after setting one or several parameters as required, it is necessary to write
them into the sensor memory, this is done by executing
File>Write parame-
ters
.
Note
: a special key
is offered for fast writing of parameters of the
RS232/RS485 interfaces;
perform testing of the sensor operation with new parameters;
to store new parameters in nonvolatile memory, execute
File>Write to flash
.
Now, with any subsequent activation of the sensor it will work in the configu-
ration you have selected.
Summary of Contents for RF603 Series
Page 1: ......
