RIFT Actuators RIFT 400, Installation, Operation & Maintenance Instructions Manual, Page: 16 / 23

Version 1.2
16
Open Closed
Analogue
Input
10 Way Power/Control Connector
Bluetooth Connected “ Flashing Green ”
This displays when the Android device has
been paired and connected. This can only
happen when the external power supply is
live.
8 x Bi - Colour LED ’ s (Red & Green)
Circular orientation displaying direction of
rotation and open/closed position.
Manual “ Flashing Red ” at the 8 O ’ clock posi-
tion indicating the Actuator is in Manual
Mode, external control signal will be ignored
whilst in this mode.
SWITCHING RIFT® 400 ‘ ON ’ (POWERING UP)
Before the RIFT® 400 can be operated, it must be taken out of sleep/ storage mode and made functional.
To achieve this:
•
Follow the electrical connection and battery connection sequence on page 1 6
•
Press the Auto/Man Touch Pad or through the RIFT App. RIFT® 400 will illuminate & Flash the LED
(Red) and display the position of the Actuator with 2 LED
’ s. The RIFT® 400 is ‘ awake ’
Displaying in the open position
Displaying in the closed position
The RIFT® 400 is now ready to either start functioning as an ON - OFF reversible electric actuator. It is
helpful in an emergency to be able to move the RIFT® 400 actuator independent of the remote control
signal. This is commonly achieved with the use of an external mechanically hand wheel, the RIFT® 400 can
be operated manually on the touch pads or with the RIFT Android App.
Touch Pad & Android App STANDARD/DEFAULT TOUCH PAD
FUNCTION How to use
AUTO/MAN Used to set the actuator to Local/
Remote control Touch & Hold (4 Seconds) to activate
OPEN Sends the actuator in a counter -
clockwise rotation to open the actuator.
Touch & Hold
CLOSE Sends the actuator in a clockwise rota-
tion to close the actuator. Menu DOWN
OPEN/CLOSE Move the Actuator to the fully opposite
position (Fully OPEN/Fully CLOSED) Double Tap OPEN/CLOSE Touch Pads or
the OPEN/CLOSE
Physical Re - Set Access the PCB Press to Re - Set
Software Re - Set User Interface under Basic Settings Click to Re - Set
12 O'clock
RIFT® 400 PCB
Auto/Manual
Manual Re - Set
Button