Install the Pole to the Desktop
Install Arm to the Pole
Install Swivel Arm(c) to the Pole
(a). Fasten the bolt with supplied
Allen Key(o). Attach the Wire Clip
(n1,n2) to the Pole(a) and Swivel
Arm(c).
j
i
k
l
m
a
g
Figure 6
Figure 8
Option C: Grommet Base Install
1. Position the Pole(a) on the mounting
surface and mark the center hole. Drill a 3/8"
(10mm) diameter hole at the marked
position through the mounting surface.
2. Install the Grommet Base Plate(m) to the
Pole(a) using 3pcs M5x14 Bolts(g), and
tighten using the Allen Key(o), see Figure 6.
3. Attach Soft Pad(t) to the Grommet Base
Plate(m), see Figure 7.
4.Position the Pole(a) on the mounting
surface and secure using the Support Plate
(j), M10 Washer(k), Spring Washer(l) and
M10 Bolt(i). Fasten the M10 Bolt using
provided Wrench(p), see Figure 8.
Self Drilled Grommet Hole Installation
4
Step 1
Step 2
t
Figure 7
c
o
n1
n2
