FRANÇAIS
ENGLISH
IT
ALIANO
NEDERLANDS
DEUTSCH
4
this instruction manual supplements the manual for the boiler in which this kit is installed. refer to that manual for all
generAl SAfety informAtion and precAutionS.
v70/240 Servomotor AcceSSory
for mixer vAlve
The
V70/240 MIXER VALVE SERVOMOTOR KIT
lets you control the mixer valve for a mixed zone in the same central hea-
ting system or in a separate central heating system served by the same boiler.
Description
Q.ty
1 - Mixer valve motor
1
2 - Instruction manual
1
The kit is packaged in a cardboard box identified by a
label bearing the name of the kit, its code and a product
bar code.
DESCRIPTION OF THE kIT
CONTENTS OF kIT
INSTALLATION
1
2
This kit must only be installed by the manufacturer’s own Technical Assistance Service or by a professionally qualified
heating engineer. Before you begin the installation turn electrical power to the system ‘OFF’ at the mains switch.
A
B
C
D
E
G
F
Parte SMUSSATA
verso il basso
Tacca verso
il BASSO
ROSSO
BLU
10
9
0
5
6
7
4
1
2
3
installing the mixer vAlve motor
- Fit the cap (A) over spindle (B) and turn it to "3". Screw in the screw (C) as shown in the figure.
- Position the motor over the mixer valve, taking care to pass the screw (C) through the hole (D) in the motor body.
- Fix the motor to the mixer valve with the screw (E) and spacer (F) provided in the kit.
- Make sure that the label is arranged as shown in the figure, then fix it in place with plastic cover (G).
BEVELLED edge at
the bottom
Pointer at the
BOTTOM
BLUE
RED
Summary of Contents for Tau Unit Oil V70 240
Page 12: ......
