8
12
DIMENSIONS
110
30
62
172
46
13
ASSEMBLY
9
Always make sure that power to the controller is completely
disconnected before removing the cover.
− Unscrew the cross-head screw holding the cover in place.
Pull the cover outwards and downwards to remove it
from the controller.
Cross-head
screw
− Mark the top fixing point on the mounting plate or wall.
Drill the hole and fit the plug and fixing screw supplied
with the controller.
Display
Cable conduits
with strain relief
Cover
Button
Fuse T2A
− Fit the controller casing over the top fixing point and
mark the position of the bottom fixing hole (distance be-
tween holes 130 mm).
− Drill the hole and fit the bottom wall plug.
