33
ENGLISH
Menu
Description
Settings range
Default
User setting
6.14.1
Logging
on
6.14.2
Free space
6.14.3
Load configuration
6.14.4
Save configuration
6.14.5
Firmware update
6.14.6
Eject
6.15
Setup wizard
On / off
off
6.16
Time and date
6.17
Daylight saving time
On / off
On
6.18
Sleep mode
On / off
On
6.19
Ethernet
6.19.3
DHCP*
On*
6.19.4
TCP/IP
Enter manually
6.20
Temperature unit
°C ÷ °F
°C
b
* DHCP (Dynamic Host Configuration Protocol): with the network protocol active (default setting), the IP configura-
tion needed in order to establish a network connection can be received by the XTDC electronic controller dynami-
cally. In effect, the controller can be managed and piloted remotely once this connection is established. However,
certain networks do not support DHCP (this will depend on the network settings). In the event that DHCP cannot be
handled by the system, the protocol must be established by entering a static IP address (obtained from the internet
service provider). This operation may require the assistance of a computer technician.
b
The XTDC electronic controller comes with a Micro SD memory card containing the complete set of manuals need-
ed for installation and operation purposes. The same card can also be used for importing firmware updates, or
saving operating data logged by the system. This data storage function, especially, used in combination with Sorel
Connect supervision software (see below for more details), is of key importance for the purposes of monitoring and
controlling smooth operation of the system.
b
Connecting the controller to a network with an Ethernet cable, data can be read, updated and corrected from a
remote location using a PC or other smart device.
Summary of Contents for SC SUN 300
Page 35: ......
