Installation
11
20045701
4.2
Notes on safety for the installation
After carefully cleaning all around the area where the burner will
be installed, and arranging the correct lighting of the environ-
ment, proceed with the installation operations.
4.3
Handling
The packaging of the burner includes a wooden platform, so it is
possible to move the burner (still packaged) with a transpallet
truck or fork lift truck.
With regard to the transport in the obligatory passages, refer to
the burner dimensions shown in Fig. 3, page 8.
Check also that the area in which you are working is empty and that
there is an adequate escape area (i.e. a free, safe area to which
you can quickly move if the burner should fall). During the handling,
keep the load at not more than 10” from the ground.
4.4
Preliminary checks
Checking the consignment
4.5
Working position
The burner is designed to work only in the positions 1, 2, 3 and 4
(Fig. 5).
DANGER
All the installation, maintenance and disassembly
operations must be carried out with the electricity
supply disconnected.
WARNING
The installation of the burner must be carried out by
qualified personnel, as indicated in this manual and
in accordance with the regulations of authorities
having jurisdiction.
Reference for the recommended installation prac-
tises shall be made to NFPA#31 for USA, CSA
Standard B139 (oil burner only) for Canada.
Oil-burning equipment shall be connected to flues
having sufficient draft at all times, to assure safe
and proper operation of the burner.
WARNING
The handling operations for the burner can be high-
ly dangerous if not carried out with the greatest at-
tention: keep any unauthorised people at a
distance; check the integrity and suitableness of the
available means of handling.
CAUTION
After positioning the burner near the installation
point, correctly dispose of all residual packaging,
separating the various types of material.
Before proceeding with the installation operations,
carefully clean all around the area where the burner
will be installed.
CAUTION
After removing all the packaging, check the integrity
of the contents. In the event of doubt, do not use the
burner; contact the supplier.
The packaging elements (wooden cage or card-
board box, nails, clips, plastic bags, etc.) must not
be abandoned as they are potential sources of dan-
ger and pollution; they should be collected and dis-
posed of in the appropriate places.
WARNING
The output of the burner must be within the boiler's
firing rate.
WARNING
A burner label that has been tampered with, re-
moved or is missing, along with anything else that
prevents the definite identification of the burner
makes any installation or maintenance work diffi-
cult.
WARNING
The burner must be installed in conformity with leg-
islation and local standards.
DANGER
Any other position could compromise the correct
working of the appliance.
Installation 4 is not recommended for safety rea-
sons.
Installation 5 is forbidden for safety reasons.
Fig. 5
S8218
1
2
3
4
5
