Riello LPG kit, Installation, Use And Maintenance Instructions

Page: 16 / 24

2915386 2 GB
LPG kit
2.1 Kit description
The kit allows the burners designed to work with natural gas to
burn LPG. The kit is composed of:
(*) LPG kit with butane amount over 30%.
2.2 Technical features
2.3 Conversion
Proceed as follows:
On the combustion head: replace the distributor 1), by that sup-
plied for LPG 2) and do the same for ionisation 3) and ignition 4)
electrodes (Fig. 1).
2 LPG kit
Description Quantity
Distributor assembly 1
Ionisation probe 1
Ignition electrode 1
Label 1
Instruction 1
WARNING
Apply the self-adhesive label for LPG operation
near the characteristics label.
Before starting the kit installation operations, get a
suitable lifting system ready.
Be careful as some drops of fuel may leak out dur-
ing the kit installation phase.
Model Code
*
Type
RS 28 - RS 28/m 3010079 - 3010080 809 T1 - 824 T1
RS 38 - RS 38/M 3010081 - 3010082 810 T1 - 825 T1
RS 50 - RS 50/M 3010083 - 3010084 811 T1 - 826 T1
Burner RS 28 - RS 28/M RS 38 - RS 38/M RS 50 - RS 50/M
Type 809 T1 - 824 T1 810 T1 - 825 T1 826 T1 - 826 T1
Max. burner output kW
Mcal/h
163 - 325
140 - 280 232 - 440
200 - 378 295 - 600
254 - 516
Min. burner output kW
Mcal/h
81
70 105
90
115
99
Minimum gas pressure
mbar
In order to have the maximum burner output, it is necessary:
11.5 13 10.5
measured at the pipe coupling, with combustion chamber at 0 mbar and gas with Net cal-
orific value = 22,200 kcal/m
3
Maximum gas pressure mbar 100
Fuel Commercial LPG (C
3
H
8
= 93 - 94%)
Net calorific value = 25.8 kWh/Nm
3
- 22.200 kcal/Nm
3
DANGER
disconnect the electrical supply from the burner by
means of the main system switch.
WARNING
Electrode setting: 2 mm behind the disc and near
the upper small tube.
Fig. 1
D1302
1
2
PROBE
ELECTRODE