manualshive.com logo in svg

Riello Hi, Comfort 100, Installer And User Manual, Page: 63 / 84

Share
Download
Riello Hi, Comfort 100 Installer And User Manual Download Page 63

63

3.12  Technical menu – 

Advanced programming

From the HOME screen, press the SET/

PROGRAM button to open the user 

menu.

SET

PROG

RESET

Press the FORWARD   or BACK   button to 

select the field PL.

SET

PROG

RESET

Press the SET/PROG button to set.

SET

PROG

RESET

Press the UP 

 or DOWN 

 button to 

insert the installer password (password 

= 18). 

ESC

MODE

Press the SET/PROG button to set.

SET

PROG

RESET

Press the FORWARD   or BACK   but-

ton to select the desired parameter.

Press the SET/PROGRAM button to set the 

selected parameter. For parameters 08 

to 19, use the FORWARD   or BACK   but-

ton to select the 2 sub-parameters.

Press the UP 

 or DOWN 

 button to 

modify the selected parameter.

Press the SET/PROG button to save and 

return to the technical menu, press ESC/

MODE to save and exit the technical 

menu, or wait 120 seconds to automat-

ically save the value and return to the 

HOME screen.

Summary of Contents for Hi, Comfort 100





















































































Reviews:

No comments