manualshive.com logo in svg

Riello Hi, Comfort 100, Installer And User Manual, Page: 62 / 84

Share
Download
Riello Hi, Comfort 100 Installer And User Manual Download Page 62

62

Parameter

Description

HOUr

Number of operating hours in high conden-

sation mode (available with OTBus connection 

between the WiFi Box and the boiler or the RF 

receiver and the boiler or the 

Hi, Comfort T100

 

and the boiler, if provided for by the OTBus pro-

tocol).

ESC

MODE

PrES

 

System pressure (available with OTBus con-

nection between the WiFi Box and the boil-

er or the RF receiver and the boiler or the 

Hi, Comfort T100

 and the boiler, if provided for 

by the OTBus protocol).

ESC

MODE

tFl2

 

Temperature read by the delivery probe in the 

second heating circuit (available with OTBus 

connection between the WiFi Box and the 

boiler or the RF receiver and the boiler or the 

Hi, Comfort T100

 and the boiler, if provided for 

by the OTBus protocol).

ESC

MODE

Press the SET/PROG button to save and return to the programming menu, press ESC/

MODE to save and exit the programming menu, or wait 180 seconds to automatically 

save the value and return to the HOME screen.

Summary of Contents for Hi, Comfort 100





















































































Reviews:

No comments