Riello G 24, Manual

Page: 15 / 20

If burner head penetration into the combustion chamber needs reducing, varying
thickness spacers are available, as given in the following list.
Spacer kit
Burner Spacer thickness
S (mm)
Kit code
PRESS GV 142 3000755
If noise emission needs reducing even further, sound-proofing boxes are available.
In case of generator heights, where a lower dimension “B” is required, ask for the
Box Support Kit code 20065135. The useful dimensions are 40 mm less than the total
dimensions indicated in the table (A, D, E). Not suitable for outdoor use.
Sound proofing box
Burner
Box
type
A
(mm)
B (mm)
min-max
C
(mm)
D
(mm)
E
(mm)
[dB(A)]
(*)
Box code
PRESS GV C1/3 650 372 - 980 110 690 770 10 3010403
(*) Average noise reduction according to EN 15036-1 standard
A
B
C
D E
BURNER KIT CODE
PRESS G24 - GV 3002719
To connect the control box to a personal computer for the transmission of opera-
tion, fault signals and detailed service information, an interface adapter with PC
software are available.
PC Interface kit
To solve problem of air in the oil sucked, two versions of degasing unit are available.
Degasing unit
Burner Filter Filtering degree
(µm)
Degasing unit
code
PRESS GV With filter 50 - 75 3010055
PRESS GV Without filter - 3010054
When the burner is installed in a room particularly subject to electromagnetic
interference (signals emitted over 10 V/m) due for example to INVERTER presence
or in systems where the lengths of the thermostat connections is over 20 meters,
this specific protection kit is available as an interface between the thermostatic
controls and the burner.
BURNER KIT CODE
All models 3010386
Protection kit (electromagnetic interferences)
15