INSTAllATION
19
1
Anti-lifting bracket
1
—
remove the spacer
—
lean the unit against the wall
—
verify the absence of cracks between the rear of the unit
and the external air ducts
—
fasten the anti-lifting bracket to the support wall
Mounting the high-wall unit
The device is supplied with a lower closure panel to be installed
in the case of high-wall installation.
To install:
—
lift the decorative side panels
—
remove them by pulling horizontally
1
Plastic terminal board cover
2
Fixing screws
3
Front panel
4
Decorative side panel
5
Intake grid
5
1
4
3
2
To remove the intake grille:
—
push it downwards
—
slide it forward
—
remove it by lifting
After having removed the intake grille:
—
unscrew the fastening screws
—
remove the front panel
1
Fixing screw
2
Lower closing panel
2
1
1
—
hook the bottom panel without fastening it with screws
