AARIA
38
5. Commissioning
The equipment’s first commissioning
must be carried out by the RIELLO
Technical Service staff; subsequently, it
shall work automatically.
It might become necessary to restart
the unit without calling the Technical
Service, for instance, after a prolonged
absence.
In these cases:
Position the system’s main switch in
the “on” position.
Use the remote control to choose the
desired functions and temperature.
Use the remote control in a radius of
5 metres from the unit, pointing it at
the unit.
Do not expose the remote control to
direct sunlight or to heat sources,
and protect it from water and dust.
The remote control is battery-
operated; please remove the
batteries if the AC is not used for over
3 months.
The remote control is designed for
easy usage, even without any specific
programming.
In order to activate it, simply insert the
batteries, reset the device and set the
clock.
Afterwards, all the buttons on the
external part of the device are active.
Summary of Contents for 20034459
Page 1: ...www riello it AMS N AMT N ISTRUZIONI PER L UTENTE USER MANUAL cod Doc 0071679 Rev 5 11 2017 ...
Page 58: ......
Page 59: ......
